Standing seam panels
Interlocking panels with raised seams hide the fasteners and shed water well. They are a common choice for a clean, long-lived look, and they are installed with clips that let the metal move.
Serving Kenosha County
Metal Roofing in Kenosha, WI
Installing and repairing metal roof panels on Kenosha houses, an option owners often weigh for snow shedding and wind.
- Repairs, leaks and full tear-offs
- Ice dams, lake-effect snow and wind damage
- Kenosha, Racine and northern Lake County, IL
Get a fast quote
Fastest: call (833) 751-2102. Or send this and we call you back.
Metal Roofing
Metal Roofing: what it covers
Quick answer
Metal roofing uses steel, aluminum or other metal panels fastened over a deck and underlayment. Owners often weigh it for snow shedding and wind resistance, which matter on the lakeshore. In Kenosha the fastening, the panel profile and the flashing decide how well it performs. Kenosha Roofing connects homeowners with a local technician who explains the trade-offs.
Metal roofing is one of the coverings owners weigh when they plan a new roof. It sheds snow more readily than most shingles, and a well-fastened panel handles wind well, which are the two things a lakeshore house asks of its roof.
The choice is not automatic, and it is not a fix for everything. A metal roof still needs sound decking, a proper underlayment and careful flashing, and its fasteners and seams are where a metal roof can fail. Its noise in a storm, its cost and its look on an older house are also part of the decision.
Kenosha Roofing connects homeowners with a local technician who can compare metal with other coverings for a particular house. The technician explains the panel options and the installation, and the price is confirmed on site.
- Service area
- Kenosha & Kenosha County
- Availability
- Phones answered 24/7, storm nights included
- Phone
- (833) 751-2102
Warning signs
Signs you need metal roofing
Do not walk a metal roof when it is wet, frosted or covered in snow, because the surface is slick and can hide loose fasteners. Keep clear of the eave when snow is sliding off a metal slope. Panels and trim have sharp edges, so wear gloves on the job. If a panel has lifted in a storm, call (833) 751-2102 before going near it.
- Shingles that are at the end of their life and need replacing on a steep house
- A roof that loses snow in sheets onto walkways and drives after each storm
- Repeated wind damage to shingles on an exposed slope
- An owner who wants a long-lived covering with fewer repairs over time
- A house where the roof framing and deck can take the added weight of a panel system
- A historic house where the owner wants a covering that suits the building
Our process
How our metal roofing visit works
Check the deck and framing for the new covering
Metal panels are installed over a sound deck, and the framing is checked to confirm it can carry the covering and any snow that stays on it. Soft or sagging sheathing is repaired first.
Lay the underlayment and the drip edge
An underlayment is laid to shed water under the panels, and metal drip edge is fitted at the eave and rake. The layers under the metal matter because the panels will not seal the deck on their own.
Fasten the panels to allow movement
Panels are fastened with the right screws or clips, spaced to allow for thermal expansion. Fasteners set too tight or too loose are a common reason metal roofs fail at the seam or the screw line.
Finish the ridge, the trim and the flashing
Ridge, rake and eave trim are fitted with the panels, and the flashing at walls and penetrations is sealed. Those joints carry the most water and are checked before the crew leaves.
Does a metal roof shed snow better than shingles?
Metal is smooth and sheds snow more readily than most shingles, which is one reason owners weigh it on a lakeshore house. Snow can still stay on the roof in cold weather, and the eave, the gutters and the walkways below still need planning for the snow that slides.
A smooth metal surface lets snow slide once it starts to melt, which can clear a roof faster than a textured shingle would. The slide can be heavy, so the area below needs to be clear of people and cars.
Cold weather can keep snow in place on a metal roof for days. The benefit is that the snow tends to come off in larger sheets rather than settling into a slow melt at the eave.
Snow guards on the upper slope are one way to manage the slide on a house where the sheets would reach a path or a drive.
How does a metal roof handle wind on the lakeshore?
A well-fastened panel with a correct profile and sound seams handles wind well, because the panels are held down at many points rather than by a sealant strip. The fasteners, the clips and the edge trim decide the result, and those are the parts to check on any installation.
Metal panels are heavy and rigid, and when they are installed with the proper clips or screws they resist the uplift that lifts shingles. The seams carry the load, so their installation matters.
Wind can still find weak points at the eave, the rake and the ridge. The trim at those edges is part of the wind performance, not an afterthought.
A metal roof does not make a deck stronger. The sheathing and the framing still have to be sound to hold the panels.
Is metal roofing right for an older house?
It can be, when the framing and deck are sound and the look suits the building. Metal is a fit for some older houses and a poor one for others, so the owner's goals and the building's character are discussed before the covering is chosen.
A metal roof changes the sound of a storm, the weight on the framing and the look of the house. Those are worth weighing with the owner rather than assumed.
On a historic house, the covering can be part of the review, and the owner should check with the local commission before choosing a material. The historic district page explains that process in Kenosha.
Options
Types and options for metal roofing
Exposed-fastener panels
Corrugated or ribbed panels with visible screws cost less and are common on outbuildings and some houses. The screws need checking over time, because the washers can fail and let water in.
Metal shingles and tile profiles
Metal made to look like shingles or tile gives a different appearance on a house that needs it. They are a good fit on some older houses, though the profile and the look are chosen with the building in mind.
Kenosha County
Why metal roofing is different in Southeastern Wisconsin and northern Lake County, IL
Metal on a Kenosha house is most often weighed for the snow and the wind. The shore sees heavy lake-effect snow in some winters and strong gusts in storm lines, and both are reasons owners look at metal instead of a shingle.
On the historic streets near downtown, the covering has to suit the building. A metal roof can be a fit for some of those houses, and the review rules are the first thing to check.
Need metal roofing today?
Call any hour and explain what is going on. You get a clear price before any work starts.
Where we work
Metal Roofing across Kenosha County
- Metal Roofing in Kenosha
- Metal Roofing in Pleasant Prairie
- Metal Roofing in Carol Beach
- Metal Roofing in Somers
- Metal Roofing in Winthrop Harbor
- Metal Roofing in Sturtevant
- Metal Roofing in Mount Pleasant
- Metal Roofing in Zion
- Metal Roofing in Racine
- Metal Roofing in Bristol
- Metal Roofing in Union Grove
- Metal Roofing in Paddock Lake
- Metal Roofing in Waukegan
- Metal Roofing in Salem Lakes
- Metal Roofing in Gurnee
- Metal Roofing in Lake Villa
- Metal Roofing in Camp Lake
- Metal Roofing in Trevor
- Metal Roofing in Caledonia
- Metal Roofing in Antioch
Not sure if you're covered? Check your ZIP code.
Related
Related services
Asphalt Shingle Roofing
Installing and repairing asphalt shingles on Kenosha houses, the covering most one- and two-family homes here commonly use.
Roof Replacement
A full tear-off and new roof on Kenosha houses, with the decking and permit checks that lakeshore homes need.
Roof Snow Removal
Clearing heavy lake-effect snow from Kenosha roofs safely, from the eave and the lower slope, without damaging the covering.
Historic District Roofing
Roof repairs and replacements on Kenosha's Civic Center, Library Park and Third Avenue historic districts, with the review step checked first.
FAQ
Metal Roofing FAQs
Is metal roofing noisy in a storm?
It can be heard more than a shingle roof, especially when rain or hail hits the panels. Adding insulation and a sound deck reduces the noise, and the technician explains the difference on site.
Does metal roofing need more maintenance than shingles?
The maintenance is different rather than heavier. Fasteners, seals and trim should be checked periodically, and the panel finish is checked after storms.
Can metal be installed over old shingles?
Sometimes, but the layers, the deck and the building department decide it. The technician checks those before recommending any overlay.
How does metal roofing compare with asphalt shingles on snow?
Metal sheds snow more readily, while shingles hold it in place longer. The snow sliding off a metal roof needs planning for the area below, and the technician explains how the house will behave.