Phones answered 24/7, storm nights includedKenosha, WI 53140
Call (833) 751-2102
(833) 751-2102
Guide

How Much Does a New Roof Cost in Kenosha, WI?

What moves a new roof quote in Kenosha, WI: pitch and squares, layers, decking, access, flashing and permits. Each quote is confirmed on site before any work.

Illustration for the guide "How Much Does a New Roof Cost in Kenosha, WI?" (Kenosha, WI)
Short answer

A new roof quote in Kenosha depends on the roof's size and pitch, how many layers come off, the condition of the decking, access and flashing, and whether a city permit applies. This guide prints no dollar figures, because each quote is confirmed on site before any work starts.

Key takeaways

  • Squares, pitch and layers set most of the material and labor in a quote.
  • New plywood roof decking needs a city permit in Kenosha. Reshingling alone on a one- or two-family home does not.
  • Soft decking found during a tear-off is repaired before the new covering goes on.
  • Every quote is confirmed on site before any work starts.

What is a square, and why does it matter for a Kenosha quote?

Roofers measure a roof in squares, and the square count tells the estimator how much material and labor a job needs.

A square is a unit of roof area used across the trade. The count is taken from the roof itself, not from the house's footprint, so a steep or complicated roof can carry more squares than its size suggests.

Pitch matters as well. A steeper roof takes longer to work and needs more safety equipment on the slope, and both show up in the quote.

Why does the decking decide whether a permit is needed?

In Kenosha, reshingling alone on a one- or two-family dwelling needs no permit, but new plywood roof decking does.

The city's permit page draws that line. A tear-off that exposes soft or rotted sheathing can turn a reroof into a permitted job, so the decking is checked before the quote is final.

The full rules for tear-offs were not in the sources used for this guide. The Department of City Inspections should confirm them before work starts.

What else moves the number?

Layers on the roof, access, flashing and ice protection each change the labor or the material list on a Kenosha job.

Each layer that comes off adds labor and disposal. Tight or steep access adds setup time. Flashing around chimneys, valleys and skylights is often the detail that takes the longest to get right.

Ice protection at the eaves and attic ventilation work change the material list too, which is why the quote is written after the roof has been seen.

Frequently asked questions

Can I get a price from this guide?

No. The sources used for Kenosha do not include a price that can be published, so this guide explains what moves a quote instead. Each quote is confirmed on site.

Does a Kenosha re-roof always need a permit?

No. Reshingling alone on a one- or two-family dwelling does not need one under the city's permit page. New plywood decking does, so the decking is checked before work starts.

What helps a technician quote faster?

The roof's age if you know it, the number of layers, and any leaks, stains or soft spots you have seen. A technician then needs to see the roof to finish the quote.

This guide is general information for Kenosha County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent help, send the form and we'll call you back.

Keep reading

More guides

Ice Dams in Kenosha: Causes and Cures

An ice dam forms when heat from the house melts snow on the roof, and the meltwater refreezes at the cold eave and backs up under the shingles.

WhatsApp